Complete sawmill (stationary)

Brenta Verticale bandzaag / automat. draaiwagen

We offer this used Brenta vertical bandsaw with an automatic turning carriage.

Bodpfjyxhq Uox Amasww
Year of manufacture: 1986

Vertical saw:
Type: Tuonyelec Machine no.: 407482 S230 N8586
Wheels: 125 cm

Saw carriage:
Type: Progress 750 Machine no.: 409621 S268 N1143886
Maximum sawing length: 12 meters

The various photos show:
- overall view of the saw
- saw machine plate
- saw with dust extraction pit
- automatic line behind the saw
- pit under the lower wheel
- feed line from the outside
- feed line as seen from the inside
- discharge line inside
- additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain
- collection bin behind the discharge line
- collection bin as seen from the other side. With a red button that can be operated from here and in the machine room
- discharge line in its entirety
- machine plate for the saw carriage
- saw carriage in the outside position, where the log can be placed
- control room behind the saw
- control room for electronic dimension setting and operation of all feed and discharge lines
- electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually
- Compressor: Atlas Copco GX 11 FF
- Type plate compressor, year of manufacture 2005
- Air dryer: Grass Air type DW 31
- Stellitem adjustment blocks for the guides through which the saw blades pass

Technical information:
- the machine must be operated with air, hydraulics, and electricity (and control current)
- the wheels (upper and lower) were ground approximately three years ago and can last for many more years
- control cabinet for the feed line was renewed in 2025
- at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment.

This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination.
The stated price is based on the Incoterm EXW, including disassembly by the buyer.

If you have any questions or would like more information, please feel free to send us a message or call us.

El anuncio se tradujo automáticamente y se pueden haber producido errores de traducción.