One-sided edge banding machine IMA Combima Systems (2005)IMA
eins. Kantenanleimmaschine Combima Systems
One-sided edge banding machine IMA Combima Systems (2005)
IMA
eins. Kantenanleimmaschine Combima Systems
Año de fabricación
2005
Estado
Usado
Ubicación
Alemania 

Datos básicos
- Descripción de la máquina:
- One-sided edge banding machine IMA Combima Systems (2005)
- Fabricante:
- IMA
- Año de fabricación:
- 2005
- Estado:
- usado
Precio y ubicación
- Ubicación:
- , Alemania

Llamar
Detalles de la oferta
- ID del anuncio:
- A225-65257
- número de referencia:
- WEHRMANN-0401700
- Actualización:
- última actualización el 17.08.2026
Descripción
- Automatic infeed table
- KFA unit
- Return system
Used single-sided edge banding machine
Manufacturer: IMA
Type: Combima Systems / I/R751220/R3
1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials.
- Automatic infeed table
- KFA unit
- Return system
Technical data "Workpiece":
Workpiece length
- min.: 238 mm
- max.: 2350 mm
Workpiece width
- min.: 142 mm
- max.: 800 mm
Workpiece thickness:
- min.: 8 - 40 mm
Technical data "Strip" (only for longitudinal processing):
Roll material:
- Paper edge bands & plastic edge bands: 0.3 - 3.0 mm
- Veneer edge bands: 0.5 - 3.0 mm
Bwjdpfx Aszuyplomasw
Edge height:
- min.: 14 mm
- max.: 45 mm
Technical data "Machine":
Variable workpiece overhang from the chain conveyor
(including edge with edge thickness 0.3-3 mm):
- min.: 40 mm
- max.: 80 mm
- PC control ICOS open
- Feed speed v=5-25 m/min, frequency-controlled drive
- Inclined roller table as infeed section
NC infeed system for front and carcass parts
- for length and width-independent automatic workpiece feed in single-sided edge processing machines.
Only for the production of strip material in the 2nd pass
- An additional stop rail, adjustable via NC axis.
Double milling unit 08.376:
- Controllable
- Motor 1 operating in the same direction and motor 2 operating in the opposite direction
- Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW.
- Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge.
- Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm.
- Adhesive application for workpiece thickness max. 50 mm
- 2 pre-melting tanks for PU adhesive
- 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm)
Vertical roll holder for 12 rolls:
- max. roll diameter 850 mm
- max. edge height 45 mm
- Trimming unit 08.42, for 2 motors mounted on the upper pressure bar
- Pre-milling and milling unit with height sensor
- with 1 motor 1000 W
- Multi-profile / chamfer unit, with 2 motors 1000 W
- Contour milling unit KFA 30
- Multi-profile drawing blade unit
- Flat drawing blade 08.517
- Copy edging unit 08.604
- Edging unit 08.617-2
- Double milling stand 75.184, 1050 mm high, both stand sides can be used
- Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm
- Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm
- Motor spindle for the use of the Hydro-Format tool system
- Return system, manufacturer Meinert
Note:
The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.
El anuncio se tradujo automáticamente y se pueden haber producido errores de traducción.
- KFA unit
- Return system
Used single-sided edge banding machine
Manufacturer: IMA
Type: Combima Systems / I/R751220/R3
1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials.
- Automatic infeed table
- KFA unit
- Return system
Technical data "Workpiece":
Workpiece length
- min.: 238 mm
- max.: 2350 mm
Workpiece width
- min.: 142 mm
- max.: 800 mm
Workpiece thickness:
- min.: 8 - 40 mm
Technical data "Strip" (only for longitudinal processing):
Roll material:
- Paper edge bands & plastic edge bands: 0.3 - 3.0 mm
- Veneer edge bands: 0.5 - 3.0 mm
Bwjdpfx Aszuyplomasw
Edge height:
- min.: 14 mm
- max.: 45 mm
Technical data "Machine":
Variable workpiece overhang from the chain conveyor
(including edge with edge thickness 0.3-3 mm):
- min.: 40 mm
- max.: 80 mm
- PC control ICOS open
- Feed speed v=5-25 m/min, frequency-controlled drive
- Inclined roller table as infeed section
NC infeed system for front and carcass parts
- for length and width-independent automatic workpiece feed in single-sided edge processing machines.
Only for the production of strip material in the 2nd pass
- An additional stop rail, adjustable via NC axis.
Double milling unit 08.376:
- Controllable
- Motor 1 operating in the same direction and motor 2 operating in the opposite direction
- Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW.
- Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge.
- Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm.
- Adhesive application for workpiece thickness max. 50 mm
- 2 pre-melting tanks for PU adhesive
- 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm)
Vertical roll holder for 12 rolls:
- max. roll diameter 850 mm
- max. edge height 45 mm
- Trimming unit 08.42, for 2 motors mounted on the upper pressure bar
- Pre-milling and milling unit with height sensor
- with 1 motor 1000 W
- Multi-profile / chamfer unit, with 2 motors 1000 W
- Contour milling unit KFA 30
- Multi-profile drawing blade unit
- Flat drawing blade 08.517
- Copy edging unit 08.604
- Edging unit 08.617-2
- Double milling stand 75.184, 1050 mm high, both stand sides can be used
- Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm
- Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm
- Motor spindle for the use of the Hydro-Format tool system
- Return system, manufacturer Meinert
Note:
The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.
El anuncio se tradujo automáticamente y se pueden haber producido errores de traducción.
Enviar solicitud
Teléfono & Fax
+49 5263 ... mostrar
También puede estar interesado en estos anuncios.
Con éxito:
Su mensaje ha sido enviado.
Clasificado
Coesfeld
1.522 km
Camión cisterna de vacío
MERCEDES-BENZMercedes-Benz Actros 2546 FFG elephant multi WRG
MERCEDES-BENZMercedes-Benz Actros 2546 FFG elephant multi WRG
Con éxito:
Su mensaje ha sido enviado.
Clasificado
Beveren
1.348 km
Hitachi ZX170W-6
HitachiZX170W-6
HitachiZX170W-6
Con éxito:
Su mensaje ha sido enviado.
Clasificado
Coesfeld
1.522 km
Camión cisterna de vacío
MERCEDES-BENZMercedes Benz Actros 2546 6x2 Wiedemann Sauger
MERCEDES-BENZMercedes Benz Actros 2546 6x2 Wiedemann Sauger
Con éxito:
Su mensaje ha sido enviado.
Clasificado
Lehrte
1.693 km
Camión grúa
SCANIAR 650 G&G LKW Berger / Wrecker / OMARS Berger
SCANIAR 650 G&G LKW Berger / Wrecker / OMARS Berger
Con éxito:
Su mensaje ha sido enviado.
Clasificado
Coesfeld
1.522 km
Camión cisterna de vacío
MANTGA 32.480 8x2 Wiedemann Super 2000, Recycler
MANTGA 32.480 8x2 Wiedemann Super 2000, Recycler
Con éxito:
Su mensaje ha sido enviado.
Clasificado
Roreto
1.057 km
LINEA COMPLETA ESCUADRADORA Y CANTEADORA
BIESSE + RBOStream SB2 11.0 + Advantage + RBK
BIESSE + RBOStream SB2 11.0 + Advantage + RBK
Con éxito:
Su mensaje ha sido enviado.
Clasificado
Coesfeld
1.522 km
Camión cisterna de vacío
MERCEDES-BENZMercedes-Benz Actros 2543 FFG elephant multi WRG
MERCEDES-BENZMercedes-Benz Actros 2543 FFG elephant multi WRG
Con éxito:
Su mensaje ha sido enviado.
Clasificado
Seesen
1.656 km
Camión portacoches
MANTGL 12.250 für 5 PKW SOFORT VERFÜGBAR
MANTGL 12.250 für 5 PKW SOFORT VERFÜGBAR
Con éxito:
Su mensaje ha sido enviado.
Clasificado
Deutschlandsberg
1.678 km
Línea completa de aserradero (estacionaria)
SpringerPini&Kay, Esterer, Springer
SpringerPini&Kay, Esterer, Springer
Con éxito:
Su mensaje ha sido enviado.
Clasificado
Legden
1.443 km
Camión portacoches
MERCEDES-BENZActros 2543 L 6x2 Omars-Aufbau Autotransporter
MERCEDES-BENZActros 2543 L 6x2 Omars-Aufbau Autotransporter
Su anuncio ha sido borrado con éxito
Se produjo un error


























































































































































































